Potassium Sulphate SDS GHS, MSDS Sheet

Anmol Chemicals is the pioneer manufacturers of Potassium Sulphate, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Potassium Sulphate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Potassium Sulfate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Potassium Sulphate SDS GHS, MSDS Sheet

Product Name: Potassium Sulphate
CAS Number: 7778-80-5
EINECS EC Number: 231-915-5
Molecular Formula: K2SO4
Molecular Weight: 174.26
Recommended usage: Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
OSHA Hazards: No known OSHA hazards
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
HMIS (Perceived): Health hazard: 0, Flammability: 0, Physical hazards: 0
NFPA (Perceived): Health hazard: o, Fire: 0, Reactivity Hazard: 0

Principal Components: Potassium Sulphate
CAS Number: 7778-80-5
EINECS EC Number: 231-915-5
Molecular Formula: K2O4S
Molecular Weight: 174,26

Always get medical attention after the first aid is over.
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If Potassium Sulphate is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.

NFPA (Perceived): Health: 0, Fire: 0, Reactivity: 0
Extinguisher Media: Use media suitable to extinguish surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Flammable Limits in Air % by Volume: N/A
Special Fire fighting Procedures: It can emit fumes & sulphur oxides on thermal decomposition. Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.

Avoid dust formation. Avoid breathing vapors, mist or gas. Prevent spillage from entering drains. Ventilate area of leak or spill. Wear appropriate personal protective equipment.
Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water.

Keep in a well closed container stored under cold to warm conditions, 2 to 40 C, (36 to 104F). Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Avoid raising dust. Keep away from naked flames/heat. Observe normal hygiene standards. Keep container tightly closed. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.

Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation Local Exhaust: Yes
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.

Molecular Formula: K2SO4
Molecular Weight: 174,26
Appearance and Odor: White crystalline powder, odorless.
pH: 3 to 8 for 5% solution.
Melting Point: 1067C.
Boiling Point: 1689C.
Density: 2,7 g/cm3 at 20 °C.
Solubility in Water: Soluble in water.

Stability: It is stable
Conditions to Avoid: Heat, humidity
Incompatibility (Materials to Avoid): Strong oxidizing agents, Aluminum.
Hazardous Decomposition Products: Sulphur oxides, potassium oxides.
Hazardous Polymerization: Will not occur

LD50 Oral - Rat - 6.600 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.

Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 680 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia - 720 mg/l - 48 h
Bioaccumulative potential: Does not bioaccumulate.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher

Waste Disposal Methods: Dispose in accordance with all applicable Federal, State and Local regulations.

USA:
TSCA Inventory Status: All ingredients are listed on the TSCA inventory.
DSCL (EEC): All ingredients are listed on the DSCL inventory.
SARA 302: Not Listed
SARA 304: Not Listed
SARA 311: Acute Health Hazard
SARA 312: Acute Health Hazard
SARA 313: Not Listed
California Proposition 65: Not Listed
Massachusetts Right To Know Components: No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components: Potassium sulfate, CAS-No. 7778-80-5
New Jersey Right To Know Components: Potassium sulfate, CAS-No. 7778-80-5

Disclaimer:
*********************************
Our company provides this MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Potassium Sulphate SDS is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
*********************************

Potassium Sulphate Pure & USP BP Grade Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.